Categories Smart Roadster/Coupe 452 Interieur Real Carbon Parts
Real Carbon Parts
|
Gas cap screen suitably for the Smart Roadster and the Coupè! CNC milled cover the plastic gas cap, which is applied with double-sided tape! How used genuine carbon, and/or wet laminate!
|
36.42 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
Trunk hinge covers suitably for the Smart Roadster, not however the Coupè! These breath-thin covers are simply glued on. In addition we offer a small quantity to plastic adhesive, which is sufficient, in order to glue approx. 4 small articles on. If you should have Sikaflex 252 or the like adhesives, these can be used. The adhesive should be however black, so that it cannot analyze.
|
71.25 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
MIRROR CAPS in genuinly carbon NOTE: These fit also on the Fortwo! Very thin carbon caps for the outside mirrors. It fastened with a commercial Karosseriekleber e.g. Sikaflex 252 (black). |
122.86 €
/ set(s)
*
Delivery weight: 5 kg
Not in stock-Delivery time on request |
|
|
|
|
Stone guards Properly matching protection of the rear fenders against falling rocks! Very thin parts, which hardly lay on. Available in carbon and in silver. The parts are applied by means of Karosseriekleber. Will turn out for inexperienced ones to let attach it in a body framework place. Installation instructions are attached. Of course the Schützer is still changeable in its size. Who would like to cover only a smaller part of the fender, she can sharpen easily smaller! |
118.23 €
/ set(s)
*
Delivery weight: 5 kg
Not in stock-Delivery time on request |
|
|
|
|
ENTRANCE BORDERS For the protection of the swelling inheritance realm we offer entrance borders in different versions: These are fastened with the double-sided tape provided! A small assembly instruction is attached likewise. Weight silver/pair: ca.135g Weight carbon/pair: ca.125g The edges are in such a way worked on, which the borders are not to be seen with closed doors to no more. If you should be to broad someone nevertheless, then an emery paper helps, in order to take some more away. One gets the white abgeschmirgelten edges away, by drawing the edge over jeans!
|
168.75 €
*
Delivery weight: 10 kg
Not in stock-Delivery time on request |
|
|
|
|
Genuinly carbon entrance borders with signature Roadster.
ENTRANCE BORDERS For the protection of the swelling inheritance realm we offer entrance borders in different versions: These are fastened with the double-sided tape provided! A small assembly instruction is attached likewise. Weight silver/pair: ca.135g Weight carbon/pair: ca.125g The edges are in such a way worked on, which the borders are not to be seen with closed doors to no more. If you should be to broad someone nevertheless, then an emery paper helps, in order to take some more away. One gets the white abgeschmirgelten edges away, by drawing the edge over jeans!
|
188.45 €
*
Delivery weight: 10 kg
Not in stock-Delivery time on request |
|
|
|
|
ENTRANCE BORDERS carbon silver For the protection of the swelling inheritance realm we offer entrance borders in different versions: These are fastened with the double-sided tape provided! A small assembly instruction is attached likewise. Weight silver/pair: ca.135g Weight carbon/pair: ca.125g The edges are in such a way worked on, which the borders are not to be seen with closed doors to no more. If you should be to broad someone nevertheless, then an emery paper helps, in order to take some more away. One gets the white abgeschmirgelten edges away, by drawing the edge over jeans!
|
188.45 €
*
Delivery weight: 10 kg
Not in stock-Delivery time on request |
|
|
|
|
ENTRANCE BORDERS genuinly carbon with their own desire signature For the protection of the swelling inheritance realm we offer entrance borders in different versions: These are fastened with the double-sided tape provided! A small assembly instruction is attached likewise. Weight silver/pair: ca.135g Weight carbon/pair: ca.125g The edges are in such a way worked on, which the borders are not to be seen with closed doors to no more. If you should be to broad someone nevertheless, then an emery paper helps, in order to take some more away. One gets the white abgeschmirgelten edges away, by drawing the edge over jeans!
|
203.00 €
*
Delivery weight: 10 kg
Not in stock-Delivery time on request |
|
|
|
|
Footrest: Simple attachment by means of the Klettband already attached! Who has the original floor mats and which got narrow part for footrest cover once a break, which will appreciate this part. Here the protection remains always where he belonged! The footrest gives a better and safer stop to the unemployed person foot, as if yield carpets!
|
52.98 €
*
Delivery weight: 5 kg
Not in stock-Delivery time on request |
|
|
|
|
Genuinly carbon trunk hinge covers for the Smart Roadster Coupe 452. German production for sticking. |
79.25 €
/ set(s)
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
Instumenten covers for the Smart Roadster The large cover replaces the original and the others serves for the addition! To be bought thus it possible first only the Originalteil is later further covers to be replaced and in addition. All covers are fastened with the double-sided tape provided.
|
28.00 €
*
Delivery weight: 2 kg
Not in stock-Delivery time on request |
|
|
|
|
All covers are fastened with the double-sided tape provided.
|
24.00 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
All covers are fastened with the double-sided tape provided.Set of two pieces
|
32.00 €
*
Delivery weight: 2 kg
Not in stock-Delivery time on request |
|
|
|
|
Frame tunnel With the frame tunnel you receive a full carbon part, with all fastening parts (likewise carbon) and a milled starter lock cover, inclusive. Installation instructions! The tunnel uses all original fastening spots, so that it can be exchanged simply against the old part. Also the weight advantage comes from carbon to carrying: The original tunnels 374g weighs and the carbon frame tunnels reaches a weight of approx. 200-210g. With it brings approx. original part to 53% on the balance.
|
248.00 €
*
Delivery weight: 10 kg
Not in stock-Delivery time on request |
|
|
|
|
Turn signal/windshield wiper lever caps in genuinly carbon. 1 set consists of 2 caps These breath-thin covers are simply glued on. Suitable adhesive Sikaflex 252 or the like of the adhesives should be however black, so that it cannot analyze. Black silicone is likewise suitable, offers however not completely the same Haftkraft.
|
18.00 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
Operating knobs for heating/ventilation: To 1 set pray-see outer 4 caps Caps for the heating and ventilation operation. These are glued on simply with commercial acrylic (overlineable joint sealing compound/building market)! Small guidance is attached
|
28.00 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
Switching/ignition cover in genuinly carbon Wet-pressed cover, which with some drops Kontaktkleber, on which Originalteil is applied! How used genuine carbon!
|
26.00 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
Starter lock cover in genuinly carbon CNC milled cover, which is applied with double-sided tape! How used genuine carbon, and/or wet laminate!
|
8.00 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
Door handle caps/inside in genuinly carbon These breath-thin covers are simply glued on. Suitable adhesive Sikaflex 252 or the like of the adhesives should be however black, so that it cannot analyze. Black silicone is likewise suitable, offers however not completely the same Haftkraft.
|
48.00 €
*
Delivery weight: 2 kg
Not in stock-Delivery time on request |
|
|
|
|
With the parking brake grasp it concerns a thin carbon bowl, which is stuck over the original grasp! But are suitable Karosseriekleber, different Silikone and acrylic. The adhesive should be however black! NOTE: The original grasp has a angeformte nose under the unlocking button. This must be removed with rough sandpaper, ev. with an electrical Dreieckschleifer! Only then the carbon grasp lets itself push over it! Sand off please so for a long time, until is possible without large force!
|
52.00 €
*
Delivery weight: 1 kg
Not in stock-Delivery time on request |
|
|
|
|
Grip caps/outside in genuinly carbon, 1 set of 2 pieces. These breath-thin covers are simply glued on. Suitable adhesive Sikaflex 252 or the like of the adhesives should be however black, so that it cannot analyze. Black silicone is likewise suitable, offers however not completely the same Haftkraft.
|
104.00 €
*
Delivery weight: 2 kg
Not in stock-Delivery time on request |
|
|
|
|
Door triangles/outside in genuinly carbon These breath-thin covers are simply glued on. Suitable adhesive Sikaflex 252 or the like of the adhesives should be however black, so that it cannot analyze. Black silicone is likewise suitable, offers however not completely the same Haftkraft.
|
81.00 €
*
Delivery weight: 2 kg
Not in stock-Delivery time on request |
|
|
|
